Cable and Wire Test
With the development of science, technology and technological level in the world, the requirements for cables and wires products are getting higher and higher. In the past the low quality products were flooding over the market, the cables and wires now on sale are required to be certified: China Compulsory Certification, which greatly improves the requirements for manufacturers in terms of quality control.
In fact, 3C authentication is actually a combination of CCEE, CCIB, EMC. The test requirements of 3C authentication for cables and wires are mainly concentrated in the GB5013/GB5023 (IEC-60245/IEC-60227).
The main test items for these series standards are the following:
|Color recognition of insulated wire core||1. General requirements||2. Color chromatography||3. Digits recognition|
|structural requirement of cables and wires||1. Conductor||2. Insulation||3.Filling|
|4. Fibre Textile||5. Sheath||6. Electrical performance|
Color recognition of insulated wire core requires products to meet general requirements and digits recognition. Manufacturers are capable to guarantee that their products can meet the standards via using the standard equipments and controlling the production process. After the completion of production, manufacturers can also use the appropriate equipment for thickness / character detection (LISUN recommends the CH-10-C desktop thickness tester and 15J reading microscope). But for the requirements of color chromatography, there is a certain error judging by the naked eye because of the limitations of the human eye, manufacturers can buy professional color tester (DSCD-920) to test produced by LISUN.
For structural requirements of cables and wires, it must be detected by professional equipment. Conductor material test: In addition to the length / material / size requirements, the standards also have requirements for extension performance and mechanical properties of materials after the aging. For carrying the test, it needs the following equipments: Ageing Oven (LISUN recommends LH-H), Thermal Elongation Tester (LISUN recommends RYS-1), Electric wire static flexing tester (LISUN recommends QR-J), Ozone Cabinet (LISUN recommends CY-100) and etc.
In addition to the ordinary high temperature / low temperature aging, the standards also mention including oil bath aging, humidity aging (LISUN recommends DK-S20 and DK-S420), a series of aging requirements and specific requirements and parameters, please refer to the form in IEC60245-1 requirements.
1、Electrical Performance Test: The wires and cables should have sufficient dielectric strength and insulation resistance to ensure electrical safety in using. The test item includes: Conductor resistance measurement/Finished cable voltage test (No breakdown occurs)/Voltage test of insulation core (No breakdown occurs)/Measurement of insulation resistance above 90°. For this series of tests, the Lisun recommends the use of bridges and clamps (QJ-57P) / insulated high resistance meter (ZC-90D) as well as other aging / environmental testing equipment.
2、Thickness Test: There is corresponding requirements of thickness of 53,57,66 cable sheath in the appendix of IEC 60245-1. According to the method of calculation in the standard, Lisun recommends desktop thickness tester (CH-10-C) for relevant testing.
3、The filling / fiber textile / sheathing test items listed in the standard can also be tested by the test equipment mentioned above.
In general, the above test consists of three steps: aging in a particular environment, carrying the test via test equipment that meets the requirements of the standard, checking the test results. The standard has made the corresponding requirements for each step and it is also difficult for manufacturers to carry the test by themselves. After years of focusing on this area, Lisun has built a powerful research and development team. Our products have been sold around the world including many famous company and lab. The costumer can check the tables below to choose their necessary devices.
|Item||Product Name||Model Number||Technical Specs Introduction:||IEC Clause||FOB Shanghai(USD)|
|1||Dumbbell cutter||Customized||2 Sets(IEC.811-1)||IEC.811-1||210.00|
|2||Sheet-punching machine||/||Punching stroke: 25mm,
Working bed dimension: 175*140mm
|3||Low magnification projector||/||50/100 times||IEC.811||5640.00|
|4||Bench thickness gauge||/||Measure range: 0-10mm±0.01mm(IEC.811-1)||IEC.811-1||180.00|
|5||Aging oven||/||IEC.811-1-2, Ventilation model,
Temperature: 200 degrees;
Work room size: 450*450*450mm;
Ventilation volume: 0~100 times/hour
|6||Oxygen ( Air bomb) aging tester||/||IEC.811, Maximum working pressure: 4.0MPa/CM2||IEC.811||9740.00|
|7||Low temperature impact tester||DWC-1||Weight: 100~1500g(IEC.811-1-4);||IEC.811-1-4||1200.00|
|8||Low Temperature Winding Testing Device||/||IEC.811-1-4, dabber D≈4－5d||IEC.811-1-4||1410.00|
|9||Low Temperature bending Testing Device||/||Cryogenic box is extra||IEC.811-1-4|
|10||Low Temperature tension testing Device||/||Tensile speed: (25±5)mm/min||IEC.811-1-4||3590.00|
|11||Ozone Resistance Aging Test Chamber||/||500*500*400mm||/||9230.00|
|12||Thermal Extension Tester||/||Weight: 60~1060g(IEC.811-2-1)||IEC.811-2-1||769.00|
|13||High Temperature Pressure Tester||/||Thickness of blade edge: 0.7±0.01mm;
3 position; Without high temperature box
|14||Cracking Resistance Winding Tester||/||Max winding diameter: 12.5mm||IEC.811-3-1||1540.00|
|15||Thermal Stability Tester||/||Without High temperature box||IEC.811-3-2||1150.00|
|16||Constant humidity flume||/||37~65/0.2 degree; 450*300*170mm||IEC.811||780.00|
|17||Constant humidity Oil bath||/||Room temperature: +10~95 degree;
|18||Bridge Fixtures||/||Resistance range: 0.01цΩ～1111.1Ω||/||1000.00|
|19||Wire and Cable Burning Tester||/||Dual flow and pressure gauge, autoignition||IEC60332-3-10||2690.00|
|21||High voltage tester for electrical wire & cable||/||10KV, Breakdown current: 0-200mA||/||1920.00|
|22||Dynamic Flexing Tester||/||Can switch between 2 or 3 wheels. With the load of 0~30A||/||5640.00|
|23||Electric Wire Static Flexing Tester||/||IEC60227-2, the static flex test||IEC60227-2||1670.00|
|24||Wire Abrasion Resistance Tester||/||￠40mm; One-way 40/min, Intelligent||IEC60227-2||3850.00|
|25||Low temperature Tester||/||0.5*0.6*0.75M; -50 degree||/||8720.00|
|26||High temperature Tester||/||0.5*0.6*0.75M; 200 degree||/||4870.00|
|27||Rubber Cable Twisting Tester||/||2 positions; (clockwise ,anticlockwise)||IEC60245-2||6150.00|
|28||Heat resistant device for braiding layer||/||High-temperature cabinet is extra||IEC60245-2||1280.00|
|29||Conductor Resistance fixture||/||Need work with bridge when the diameter >6mm^2||/||330.00|
|30||Wire Bending Tester||/||2 position intelligent servo;
Touch screen, with load
|31||Plug Wire Static Tensile Tester||/||Displacement speed: 300mm/min
Weight: 5Lb， 8Lb， 10Lb， 20Lb
Test Time: 0~99.99mins or 0~99.99hs
Position: 6 positions
|32||Wire damage tester||WDT-1||2 positions||/||3080.00|
|33||ABRUPT PULL TESTER||/||Position: 3 positions
Angle of bar: 90° and 180°
Height of bar: 2 cores: 178mm
3 cores: 254mm
|35||Reading microscope||/||Gain: 10X
X axis test range: 50mm
Y axis test range: 13mm
Contact us if you need more info or quotations:[email protected]