Constant Temperature Integrating Sphere

Constant Temperature Integrating Sphere

Product No: IS-*MT

  • Description
  • Inquiry

According to requirement of IEC standards, the standard test temperature is 25鈩, but high power lamps such as HID lamps and LED outdoor luminaires will produce a lot of heat during the test, thus the temperature inside the integrating sphere can not meet the requirements of IEC standards. Lisun Group designed the Constant Temperatured Integrating Sphere which allows the lamp was tested in a constant air temperature.

鈥 Diameter: IS-0.3MT (0.3m), IS-0.5MT (0.5m), IS-1.0MT (1.0m), IS-1.5MT (1.5m), IS-1.75MT
(桅1.75m), IS-2.0MT (桅2.0m). Other size can be designed according to the customer鈥檚 request.
鈥⒙燩ainting of integrating spheres is according to CIE Pub.No.84 (1989).
鈥⒙燤aterial: Pure barium soleplate (BaSO4).
鈥⒙燘aSO4 coating: 蟻 (位) 鈮0.96 (450nm~800nm) and 蟻(位)鈮0.92 (380nm~450nm).
鈥⒙燜ine diffuse reflection: Reflectance蟻鈮0.8 and accuracy of 蟻 (位) <1.5%.
鈥 Build-in all functional lamp testing jigs: the vertical is for E40/E27, the horizontal is for T5/T8/T12 tubes and the Testing Holder Base for LED street luminiares. All of the testing jigs can allow the lamp be tested up and down in the sphere.
鈥⒙燗uxiliary lamp position has been built-in. Auxiliary lamp and Auxiliary lamp device are optional.
鈥⒙燩ower cable and socket has been build-in, it is convenient to power the testing lamp.
鈥⒙燭wo photo detector ports, one optical fiber port and temperature sensor hole are built-in.
鈥⒙燙onstant Temperature controlled range: 25鈩-55鈩 (refer to the environmental temperature with 25鈩).
A. Temperature Increasing tolerance: 卤1鈩
B. Temperature Down tolerance: 卤2鈩

The integrating sphere works with a Spectrophotometer to do the photometry, colorimetry and radiometry parameters measurement:
鈥 IS-0.3MT/IS-0.5MT is suitable for LEDs, LED modules, High Power LED, mini bulbs and other small lamps. The flux testing range is 0.001 to 1,999 lm.
鈥 IS-1.0MT is suitable for CFL or LED bulbs. The flux testing range is 0.1 to 199,990 lm.
鈥 IS-1.5MT/IS-1.75MT is suitable for CFL, LED bulb and tube, fluorescent lamp, CCFL. The flux testing range is 0.1 to 1,999,900 lm.
鈥 IS-2.0MT is suitable for HID lamps or high power lamps. The flux testing range is 0.1 to 1,999,900 lm

The integrating sphere works with a聽Spectrophotometer聽to do the聽photometry,聽colorimetry聽and radiometry parameters measurement, but the large size of LED and HID fixtures are difficult to be fixed in the center of integrating sphere to test. To solve this kind luminaries fixtures color temperature test, Lisun Group developed Integrating Sphere with Side Assistant Opening. There is a maximum side assistant opening to fix the lighting fixtures to test.

Work with the follow instruments as a System