JL-XC series waterproof test chambers are mainly used for small electronic and electrical products such as lamps, electrical cabinets, electrical components and so one. It is used for physical and other related properties checking under simulated climatic conditions. It determines whether the performance of the product meets the requirements or not after the test. It is very useful in the design, improvement, verification and factory inspection of the product. The JL-XC fully meets IEC60598-1, IEC60529:1989 +A1:1999 +A2:2013 《Degrees of protection provided by enclosures(IP Code)》, GB4208-2008 and GB7000.1.
Features: • The outer casing is made of high-quality steel plate, and the surface is painted with paint which is beautiful and durable. The inner box, the turntable, and the wading part are all made of SUS304 stainless steel plate to make sure that it will not rust after using for a long time. (Inner box sheet thickness: 1.2mm, can handle the water pressure) • IPX12: The compressed air drying function can remove the excess water in the drip tank after the test to avoid long-term water accumulation and fouling. (User need to provide air compressor) • IPX34: The driver for the swing pipe adopts high-quality servo stepping motor, the swinging speed and angle are precisely adjustable. There is no out-of-step problem (the risk of out-of-step: it will cause the swinging tube to malfunction, hitting the middle turntable shaft, causing equipment damage) • IPX56: It is with monolithic structure. The sray gun direction is adjustable and can be fixed. The operator only need to start the test but no need to carry the spray gun. • The water supply line is equipped with a filter to filter impurities in the water to prevent nozzle clogging. • The LED waterproof lighting is installed in the chamber, and there is a large observation window on the door to facilitate the observation of the test sample. • The equipment equipped with a water tank for recycling water, no need building a professional waterproof test room. The water tank float valve in the water tank automatically controls the water inlet, and has high and low water level alarm monitoring to effectively prevent the pump from being damaged due to running out of water. • The turntable uses a stepper motor, the speed can be set on the touch screen, and can control the forward and reverse rotation (suitable for the sample power-on test to prevent winding). • Touch screen control function: Directly select the waterproof level on the self-developed IPX waterproof level test operation interface. You can run test according to the waterproof rating conditions in the standard terms easily. • Test sample input power: single-phase 220V/10A (other specifications can be customized) • Equipment power supply frequency: Default is 50Hz and 60Hz is also available (It is very important to confirm us your grid power frequency)
Specifications
Model
JL-12CP-600M
JL-12CP-1200M
Test Level
IPX1,IPX2
Drip size
600*600mm
1200*1200mm
Drip aperture
¢0.4mm
Distance between drip holes
20*20 mm
Turntable diameter
¢600 mm
Flow
1-5 mm/min(±0.5mm/min)
Flow adjustment method
Manual adjust
Drip board lifting method
Not lifting (Fixed)
Turntable height range
350-700 mm
Turntable maximum load bearing
50KG
Turntable tilt
0°or15°(horizontal direction)
Turntable speed
1 r/min(IPX1)
Test time
0-999 min
Security function
Leakage protection, water shortage protection, short circuit protection
Equipment power supply
380V/Three-phase/50Hz (60Hz customizable)
Model
JL-34CP-R200
JL-34CP-R400
JL-34CP-R600
Test Level
IPX3,IPX4
Swing tube size
R200mm
R400mm(Can be added R200mm swing tube)
R600mm(Can be added R400mm, R200mm swing tube)
Inner box size
500*500*500mm
900*900*900mm
1300*300*1300mm
Water jet aperture size
0.4mm
Swing tube inner diameter
15mm
Turntable diameter
200mm
400mm
600mm
Flow
0-1L/min
0-2L/min
0-3L/min
Turntable Maximum load bearing
50kg
Turntable height range
150-250mm
350-600mm
550-1000mm
Turntable rotation speed
1-5r/min(Precision adjustable)
Turntable rotation
Always forward / Forward and reverse alternate
Pendulum angle
120º(IPX3),350º(IPX4)Or custom settings
Swing tube Swing speed
240°back and forth 4S,720°back and forth 12S(Precision control) or custom settings
Security function
Leakage protection, water shortage protection, short circuit protection
Equipment power supply
220V/Single Phase/50Hz(60Hz customizable)
Model
JL-56CP-200L
JL-56CP -500L
JL-56CP -1000L
JL-56CP -1400L
Test Level
IPX5,IPX6
Inner box size
600*600*600mm
800*800*800 mm
1000*1000*1000mm
1180*1180*1000mm
Water tank volume
about100L
Turntable size
¢400mm
¢600mm
¢600mm
¢800mm
IPX5 Water spray aperture
¢6.3mm
IPX6 Water spray aperture
¢12.5mm
IPX5 Water spray flow
12.5±0.625(L/min)
IPX6 Water spray flow
100±5(L/min)
Flow adjustment method
Manual adjust (Rotor flowmeter)
Water spray distance
2.8m
Spray gun fixing method
Mechanically fixed and can adjust the angle of the gun manually (if need to automatically swing the spray gun, please order JL-56CA series)
Turntable maximum load bearing
50KG
Turntable lifting range
Not lifting (Fixed)
Water spray method
Recyclable
Security function
Leakage protection, water shortage protection, short circuit protection
Equipment power supply
380V/Three-phase/50Hz (60Hz customizable)
Model
JL-1234CP -R200
JL-1234CP -R400
JL-1234KCP-R400
Test Level
IPX1,IPX2,IPX3, IPX4
IPX1,IPX2,IPX3, IPX4, IPX4K
Inner box size
500*500*650mm
900*900*1050mm
900*900*1050mm
Turntable size
¢200mm
¢400mm
Turntable maximum load bearing
50KG
Turntable height range
150-250 mm
450-750 mm
Turntable tilt
0°or15°(horizontal direction)
Turntable speed
1 -5r/min(Precision adjustable)
Turntable rotation
Always forward / Forward and reverse alternate / intermittent rotation
Test time
0-999 min
IPX12 part – technical parameters
Drip size
200*200mm
600*600mm
Drip aperture
¢0.4mm
Distance between drip holes
20*20 mm
Flow
IPX1=1mm/min;IPX2=3mm/min
Flow adjustment method
Manual adjust
Drip board lifting method
Can not lifting (fixed)
IPX34 part – technical parameters
Swing tube size
R200mm
R400mm(Can be added R200mm swing tube)
Pendulum flow
IPX3=0.56L/min;IPX4=0.84L/min
IPX3=1.1L/min;IPX4=1.8L/min;IPX4K=15L/min
Water jet aperture size
0.4mm
0.8mm
Water spray aperture spacing
50mm
Swing tube inner diameter
15mm
Pendulum angle
120º(IPX3),350º(IPX4)Or custom settings
Swing tube Swing speed
240°back and forth 4S,720°back and forth 12S (precise control) or custom
Security function
Leakage protection, water shortage protection, short circuit protection